SBC Cooling Private Limited

A shell and tube heat exchanger is a device that facilitates heat transfer between two fluids. It consists of a bundle of tubes enclosed within a shell, where one fluid flows inside the tubes while the other flows outside the tubes but within the shell. This design is commonly used in various industries like oil refineries and chemical processing plants for heating or cooling large fluid volumes.



Key Components and Function:

• Shell: The outer casing that encloses the tube bundle. Tubes: These are the conduits through which one fluid flows. 

SBC offer Shell and tube Condenser and evaporator which are manufactured and design using the best technological solution as per different application area. The shell manufactured by using heavy duty ERW Mild Steel , Stainless Steel, Carbon Steel pipe or rolled from carbon steel plate (as per requirement) for durable finish standard,robust construction,pre long life and excellent in performance.

The tube is made of special high performance copper, mild steel and stainless steel both internally and externally grooved fins (as per requirement) for lowfouling factor with high heat transfer capacity. The offered product is precisely in compliance with ASME & TEMACode.

Water Cooled Condenser :

Technical Specification : ( Shell & Tube type )

Tube MOC :

Copper, Stainless Steel and cupronickel (Marine Application) with External grooved.

Tube Outer Dia :

3/8”, 1/2”, 5/8”, 3/4”. (Customized)

Tube Wall Thickness :

1 mm (Customized)

Shell MOC :

Mild Steel, Stainless Steel & Carbon Steel.

Tube Pressure Testing :

200 psi for 24 hr

Shell Pressure Testing :

350 psi for 24 hr

Types of Evaporators we are using in our Chillers

• Imported Brazed Type Plate Heat Exchanger
• Gasket Type Heat Exchanger
• Shell & Tube Type Heat Exchanger
• Coil in Tank Type Heat Exchanger
• Tube in Tube Type Heat Exchanger

For more than 10 years, we have been making condenser and evaporator coils for many global air conditioning brands. SBC provides both copper and aluminium tubes with tube O.D. from 7 mm up to 16 mm with various fin patterns for different applications.

Coil Capabilities :

• We can handle almost any coil for both air conditioning and refrigeration:
• Condenser Coils, Evaporator Coils and Fluid Coolers.
• Tube Sizes :7 mm, 1/2 inch, 3/8 inch and 5/8 inch.
• Tube Thickness :We stock a variety of thicknesses for most tube sizes. (Standard 0.27 mm).
• Tube and Fin Materials :Aluminium, copper, copper clad aluminium, cupronickel and stainless steel.
• Rows : Customize (as per customer's requirement) starting from 1 Row.
• Fin Materials : Aluminium and copper, and pre-coated aluminium.
• Chemical Composition : Copper 98.99%
• Fin Edges :Straight edge and ripple edge.
• Fin Surfaces : Plain, flat, corrugated, louver, raise lance, sine wave, sine wave slit surface and super slit.
• Fin Spacing :4 FPI to 12 FPI.
• Headers : Aluminium, steel, copper, galvanized iron and stainless steel.
• Protective Coatings : Hydrophilic protective coated fins, gold and blue.
• Pressure Testing :450 PSI for 24 hours.

Types of Coils :

• Condenser Coils
• Evaporator Coils
• Air Handling Unit Coils
• Heating Coils

Air Cooled Condenser :

• Tube Thickness : 0.27 mm
• Tube MOC :Copper Tube Inner Grooved
• Chemical Composition :99.98%
• Tube O.D : 3/8" and 1/2"
• Fins MOC : Corrosion Preventive Blue Fins
• Fins Thickness : 0.15 mm
• End Plate MOC : Galvanized Iron
• Pressure Testing : 450 psi. for 24 Hours

We can design or duplicate any types of existing heat exchangers in a variety of materials Features

• Manufactured with utmost care and perfection
• Defect free
• Anti-corrosive nature
• Stability of control
• Available in different shapes
• Long lasting
• Perfect finishing